 |
| Quantity: | |
|---|---|
cv-3.5T mini
HEBEI CUSTOM VEHICLE
cv-for-006
The CV-3.5T Mini All-terrain Forklift is designed for industries that require reliable material handling in challenging outdoor environments. With a 3.5-ton rated lifting capacity, four-wheel drive, and compact turning radius, it provides an optimal balance of performance, durability, and cost efficiency.
Rated capacity: 3.5 tons with lifting height of 3 m.
Engine: Yunnei Power 490, known for stable output and easy maintenance.
Drive system: Four-wheel drive with Ginlitt 265 dual high-low speed torque converter.
Dimensions: 3.8 × 1.8 × 2.3 m, fork width 1.22 m.
Ground clearance: Center 0.3 m, gantry 0.25–0.35 m.
Tyres: 20.5/70-16, suited for uneven terrain.
Turning radius: 3.5 m for maneuverability in tight yards.
Maximum gradient: ≤35° for slope and rough ground operation.
Frame: Reinforced with 0.03 m hinge thickness for durability.
Price: Competitive promotion price of $6,000.
High value for cost – At $6,000, it delivers 3.5-ton capacity and all-terrain capability at a fraction of the cost of similar off-road or telehandler equipment.
Strong adaptability – Four-wheel drive, high ground clearance, and large tyres enable use on construction sites, quarries, farms, and lumber yards.
Compact and flexible – 3.5 m turning radius and relatively small footprint allow operation in confined areas where larger machines cannot enter.
Maintenance friendly – Powered by the widely used Yunnei 490 engine with accessible spare parts and straightforward servicing.
Handles palletized bricks/blocks (1.5–2.5 t), bagged cement/aggregate, and short-haul steel members with 3 m stacking and truck loading. The ≤35° gradeability, 0.25–0.35 m gantry ground clearance and 3.5 m turning radius reduce bog-downs on crushed stone, mud and uneven ramps. Recommended options: 1,220 mm forks or long forks, sideshift, protective screens, and heavy-duty tyres.
Moves bundled boards and timber packs (2–3 t) and performs truck loading on dirt or gravel roads. 20.5/70-16 tyres, four-wheel drive and a 1.22 m fork width improve stability with bulky loads and rutted surfaces. Suggested add-ons: long forks or a log/wood clamp, wide-angle mirrors, and work-light kits for dawn/dusk shifts.
Transfers 1–1.5 t big bags of feed/fertilizer and palletized produce between fields, sheds and cold-room docks. Four-wheel drive and 0.3 m chassis clearance maintain traction on soft or wet ground; the 3.8 × 1.8 × 2.3 m footprint navigates narrow shed aisles. Useful options: big-bag hook, corrosion-resistant treatment for fertilizer areas, and dust screens.
Performs yard handling of steel, profiles, FIBCs and crated equipment (1–3 t) with 3 m stacking and frequent truck turnarounds. The dual high/low-speed torque converter enables precise inching for fork alignment, while 4WD keeps operations reliable in rain or puddled surfaces. Recommended: sideshift or positioning forks, fork sleeves and (optional) onboard weighing for faster inventory checks.
A versatile, easy-to-train machine for municipalities, small jobsites and temporary facilities. Yunnei 490 parts availability and a simple layout mean quick service and high uptime, and the $6,000 price point shortens payback while covering most sub-3.5 t off-road handling needs. Standard rental spec: forks with sideshift plus lighting and safety beacons for extended working hours.
Operating data reference: 3.5 t rated capacity, 3 m lift, ≤35° gradeability, 3.5 m turning radius, 4WD, 20.5/70-16 tyres—engineered for outdoor, unpaved, sloped and confined work areas.
| model | 3.5T mini |
| engine type | Yunnei power490 |
| size specification(m) | 3.8*1.8*2.3 |
| fork width(m) | 1.22 |
| gantry width(m) | 0.16 |
| maximum permissible gradient | ≤35° |
| type of drive | four-wheel drive |
| tyre size | 20.5/70-16 |
| rated lifting weight | 3.5t |
| rated lifting height(m) | 3 |
| center ground clearance(m) | 0.3 |
| ground clearance of the gantry(m) | 0.25-0.35 |
| frame hinged thickness(m) | 0.03 |
| hydraulic torque converter | Ginlitt 265 double high low speed |
| radius of turning circle(m) | 3.5 |
| price | $6,000 |
The CV-3.5T Mini All-terrain Forklift is designed for industries that require reliable material handling in challenging outdoor environments. With a 3.5-ton rated lifting capacity, four-wheel drive, and compact turning radius, it provides an optimal balance of performance, durability, and cost efficiency.
Rated capacity: 3.5 tons with lifting height of 3 m.
Engine: Yunnei Power 490, known for stable output and easy maintenance.
Drive system: Four-wheel drive with Ginlitt 265 dual high-low speed torque converter.
Dimensions: 3.8 × 1.8 × 2.3 m, fork width 1.22 m.
Ground clearance: Center 0.3 m, gantry 0.25–0.35 m.
Tyres: 20.5/70-16, suited for uneven terrain.
Turning radius: 3.5 m for maneuverability in tight yards.
Maximum gradient: ≤35° for slope and rough ground operation.
Frame: Reinforced with 0.03 m hinge thickness for durability.
Price: Competitive promotion price of $6,000.
High value for cost – At $6,000, it delivers 3.5-ton capacity and all-terrain capability at a fraction of the cost of similar off-road or telehandler equipment.
Strong adaptability – Four-wheel drive, high ground clearance, and large tyres enable use on construction sites, quarries, farms, and lumber yards.
Compact and flexible – 3.5 m turning radius and relatively small footprint allow operation in confined areas where larger machines cannot enter.
Maintenance friendly – Powered by the widely used Yunnei 490 engine with accessible spare parts and straightforward servicing.
Handles palletized bricks/blocks (1.5–2.5 t), bagged cement/aggregate, and short-haul steel members with 3 m stacking and truck loading. The ≤35° gradeability, 0.25–0.35 m gantry ground clearance and 3.5 m turning radius reduce bog-downs on crushed stone, mud and uneven ramps. Recommended options: 1,220 mm forks or long forks, sideshift, protective screens, and heavy-duty tyres.
Moves bundled boards and timber packs (2–3 t) and performs truck loading on dirt or gravel roads. 20.5/70-16 tyres, four-wheel drive and a 1.22 m fork width improve stability with bulky loads and rutted surfaces. Suggested add-ons: long forks or a log/wood clamp, wide-angle mirrors, and work-light kits for dawn/dusk shifts.
Transfers 1–1.5 t big bags of feed/fertilizer and palletized produce between fields, sheds and cold-room docks. Four-wheel drive and 0.3 m chassis clearance maintain traction on soft or wet ground; the 3.8 × 1.8 × 2.3 m footprint navigates narrow shed aisles. Useful options: big-bag hook, corrosion-resistant treatment for fertilizer areas, and dust screens.
Performs yard handling of steel, profiles, FIBCs and crated equipment (1–3 t) with 3 m stacking and frequent truck turnarounds. The dual high/low-speed torque converter enables precise inching for fork alignment, while 4WD keeps operations reliable in rain or puddled surfaces. Recommended: sideshift or positioning forks, fork sleeves and (optional) onboard weighing for faster inventory checks.
A versatile, easy-to-train machine for municipalities, small jobsites and temporary facilities. Yunnei 490 parts availability and a simple layout mean quick service and high uptime, and the $6,000 price point shortens payback while covering most sub-3.5 t off-road handling needs. Standard rental spec: forks with sideshift plus lighting and safety beacons for extended working hours.
Operating data reference: 3.5 t rated capacity, 3 m lift, ≤35° gradeability, 3.5 m turning radius, 4WD, 20.5/70-16 tyres—engineered for outdoor, unpaved, sloped and confined work areas.
| model | 3.5T mini |
| engine type | Yunnei power490 |
| size specification(m) | 3.8*1.8*2.3 |
| fork width(m) | 1.22 |
| gantry width(m) | 0.16 |
| maximum permissible gradient | ≤35° |
| type of drive | four-wheel drive |
| tyre size | 20.5/70-16 |
| rated lifting weight | 3.5t |
| rated lifting height(m) | 3 |
| center ground clearance(m) | 0.3 |
| ground clearance of the gantry(m) | 0.25-0.35 |
| frame hinged thickness(m) | 0.03 |
| hydraulic torque converter | Ginlitt 265 double high low speed |
| radius of turning circle(m) | 3.5 |
| price | $6,000 |