9276191 ECU controller for Hitachi ZX200-5GZX200-3 ZX330-3 ECU replace ECU on Hitachi excavator engine computer Engine Control Unit

9276191ECU for Hitachi ZX120-3 ZAXIS120-3

| Direct Replacement | 1-Year Warranty | Customs Vehicle

Is your Hitachi excavator experiencing issues like failure to start, loss of power, erratic engine behavior, or error codes? A faulty ECU is often the culprit. Our ECU controller is a 100% direct replacement for the original OEM part, designed to restore your excavator to its optimal performance.

Every ECU for Hitachi  comes with a 12-month warranty and is tested before shipment. We offer fast global shipping to get you back up and running with minimal downtime.

Comprehensive auto parts inventory available，If you can't find the accessories you need, you can contact me.

Shipping Way: DHL, FedEx, UPS, TNT, EMS, ARAMEX, By Air

Packaging Details: Neutral Packing

Hydraulic Main Pump Compatibility List

ECU Controller Compatibility List 

FAQ

Q1: How to Confirm Compatibility? MUST READ Before Ordering!                       

1. Locate Your Old ECU: The ECU is typically located in the cab or under the seat of your Hitachi excavator.

2. Check the Part Number: Match the part number on your old unit with ours (YA00002098). Even a single digit difference matters!

3. Provide Machine Serial Number: For ultimate confirmation, provide your excavator's serial number to our support team via live chat.

Q2: Is this a new or used ECU?                                     

  

 It is a remanufactured unit. We take a used core, replace all faulty components, and test it to meet new performance standards. It comes with a new unit warranty.

Q3: How to choose the right hydraulic pump?          

Remember three key specs: 1) Working pressure (Bar) 2) Flow rate (L/min) 3) Port size. Always check equipment manual before buying.

Q4: Which is better, gear pump or piston pump?           

Each has merits: Gear pumps are - affordable & durable but lower pressure;

Piston pumps are - high pressure & efficient but costly. Choose based on needs!

Q5: What to pay special attention to after installing new pump?        

1) Avoid full load 2) Check oil temp/level every 8hrs 3) Watch for unusual vibration.

Q6: How to install the ECU?         

Installation is straightforward: 1) Disconnect the battery. 2) Unplug the connectors from the old ECU. 3) Swap the units. 4) Reconnect the battery. We provide a detailed installation guide with every order.

Contact

If you are interested with our product , you can contact us via any one of the following ways , we will respond promptly once we have your inguiries , Welcome your visit.

Call our experts: +8619957983604

Email: larry@customsvehicle.com

Visit: https://www.customsvehicle.com/

{"json":"[{\"downloadUrl\":\"//irrorwxhliinlp5p.leadongcdn.com/Excavator+Part+Catalog+2505-aidorBpnKolRllSlklnlllok.pdf?dp=1\",\"encodeFileId\":\"fNpKgtEZAWSO\",\"fileId\":14440284,\"fileName\":\"Excavator Part Catalog 2505.pdf\",\"fileType\":\"pdf\",\"photoUrlNormal\":\"//rmrorwxhliinlp5q.leadongcdn.com/static/assets/widget/images/downloadNew/pdf.svg\",\"pname\":\"Excavator Part Catalog 2505.pdf\",\"name\":\"Excavator Part Catalog 2505.pdf\"}]","type":"1"}

Call our experts: +8619957983604

Email: larry@customsvehicle.com

Visit: https://www.customsvehicle.com/